In the bending process of metal stamping parts processing, the main considerations are tool selection, bending sequence, bending compensation, bending interference, etc. Bending programming software is usually sold randomly, but most domestic CNC bending machines are still programmed manually, often relying too much on the experience of masters. On the other hand, domestic metal stamping parts processing requirements are relatively foreign. There is still a certain distance, so the efficiency has not improved, and the performance of the CNC bending machine has not been exerted to the extreme.

Metal stamping parts are processed and then the material will be sent to the CNC punching/cutting machine for punching/cutting process. In this process, it is necessary to compile NC codes for the parts to be processed. Most machine tool manufacturers now provide automatic programming software, which greatly facilitates programming engineers.

Metal stamping parts processing

Stamping/cutting programming engineers need to consider factors such as plate utilization, cutting tools, efficiency, and precision. After stamping/cutting is complete, the part is de-microconnected and sent to a bending machine for bending.

The first step in the processing of metal stamping parts is the blanking process. Usually, the on-site workers will use the shearing machine to cut the part material of appropriate size from the large plate according to the expansion diagram provided by the technical part. If it is a punch press, the dead zone of the clamp must be considered.